High Performance Polycarboxylate Superplasticizer/PCE/Water Reducing Agent

• Type: water-reducing admixture
• Appearence: Colorless/Yellowish/Brown
• Density: D+0.02g/Cm
• pH: 6-7
• Water Reducing Rate: >25
• Air Content: <3
• Model NO.: KC-SC05
• Cholride Ion Content: 0.6
• Application 1: Floor Leveling Mortar
• Company Type: Manufacturer and Export
• Transport Package: Plastic Barrel
• Specification: L=1.15m H=1.2m W=1m
• Trademark: Kaicheng
• Origin: China
• HS Code: 38244010
• Production Capacity: 9000t/Year

Product Description

Product Introduction
Polycarboxylate high-performance superplasticizer (retarding type) is a retarded polycarboxylate high-performance water-reducing agent composed of a water-soluble water-reducing agent combined with a fusidic acid-based polymer as the main body. Water agent. It has the characteristics of superplasticization, high slump retention, high reinforcement and low shrinkage, and can be prepared with different strength grades. It is especially suitable for formulating high-strength, high-fluidity, self-compacting, high-durability, and high-performance concrete. Product performance reaches GB8076, JB/D233 standard.
Main technical performance

High efficiency water reduction, water reduction rate ≥ 25%.
High fluidity, high slump retention, and small slump loss over time.
The initial setting has a retarding effect, and the strengthening effect is obvious after the final setting, which does not affect the later strength of concrete.
Condensation time, gas content and can be adjusted according to engineering needs.
The freshly mixed concrete has good workability, no segregation, no bleeding, and good pumpability.
Significantly improve the anti-freezing, anti-seepage, anti-carbonization and anti-shrinkage indexes of concrete, which can greatly extend the service life of concrete.
The product has good adaptability and is suitable for various types of cement, especially suitable for high-strength, high-fluidity and high-performance concrete prepared with active admixtures such as fly ash and ground ore powder.
No chlorine, low alkali, no corrosion to steel bars. The product is non-toxic, harmless and safe for health and the environment.

Scope of Application
This product is especially suitable for hot summer construction, large volume concrete. It can effectively delay the peak of hydration heat in concrete, avoid temperature difference cracks, reduce shrinkage, and make concrete have good volume stability.
It is suitable for preparing various grades of pumped concrete and commercial concrete for long-distance transportation.
It is suitable for high-strength concrete, fluidized concrete, self-compacting concrete, large-volume concrete, and high-performance concrete structure. ,
It is suitable for various civil construction projects, high-rise reinforced concrete frame-shear structures, especially for highways, railways, bridge projects, tunnel projects, hydraulic dams, nuclear power projects, ports, docks, underground facilities, etc. Concrete durability.

Usage and precautions
This product is a colorless or light yellow liquid, and the usual dosage is 0.5~2.5% (based on the total weight of the cementitious material).
Before use, the optimal dosage should be determined according to the engineering construction requirements, material characteristics, and trial preparation.
In use, it should be accurately measured to avoid large dosage errors, and to prevent heavy mixing and missing mixing.
It cannot be used in combination with naphthalene-based superplasticizers. When used in combination with other types of admixtures, it should be confirmed by tests.
After the concrete is poured, the concrete should be maintained according to the construction regulations. Changes in sand, mud content and admixture quality have a greater impact on the water-reducing effect of the product. Users should select aggregates and admixtures that meet the standards.

Package and Storage
This product is liquid, packed in plastic barrels, 1 ton/barrel or 200kg/barrel, and can also be shipped by tanker. The storage process is anti-leakage, anti-exposure and anti-high temperature.
The storage period is one year, and the use should be confirmed by testing after expiration.
This product is non-flammable and explosive.

About Us

Henan Kaicheng New Materials Co.,Ltd is located in Weihui industrials area, henan province. It covers an area of
15,000 square meters and invests 10 million yuan for the first phase.It is a high-tech enterprise with concrete admixture
as the leading product ,integrating R&D,production and sales.It is a member of the China Construction Materials Federation concrete additives branch.
It has the leading technology level in China,high-quality production environment,first class production equipment,and
operating procedures that meet national production standards, is a production, study and research base of Henan
Science and Engineering University,own the largest  R&D center with most complete equipment in the same industries
in Henan province.
It has 5 senior engineers and 6 engineers, specializing in the research and development of concrete admixture related technologies.owning two series of more than ten kinds of new concrete admixtures. The production capacity is 90,000
tons per year, including 80,000 tons of polycarboxylic acid deries and 10,000 tons of naphthalene series.
The products have passed ISO9001 quality management system certification,environment managerment system certification,occupational health and safety management system certification,China national Complusory Product Certification
and China Railway General Administration Railway Product Certification Center certification, also is one of the few railway
product certification manufacturers in Henan Province.
FAQ:
1. Q: Are you a manufacturer or a trading company?
A: We are a manufacturer of PCE in China.
2. Q: Can you provide technical support?
A: Yes, we can provide on line or on site technical support.
3. Q: How many is your production capacity?
A: We can produce final products 3000 Metric Tons per month.
4. Q: What's your MOQ?
A: 1 Metric Ton.
5. Q: Could you offer free sample?
A: Yes, we can provide sample free for your testing.
6. Q: What's your delivery time?
A: Within 7-12 days after receiving deposit.
7. Q: Could you do OEM or ODM?
A: Yes, we can. We can do solid content 50% or 60%.
8. Q: What's your export port?
A: Qingdao port.